Writing Machine
latest
KS0552 Keyestudio Writing Machine for Arduino DIY
KS0552 Keyestudio Writing Machine for Arduino DIY
Read me frist
List
1. Features
2. Parameters
3. Preparation
4. Modify firmware parameters
5. Generate pictures into Gcode through Inkscape
6. Control the machine to draw via Universal Gcode Sender
7. Turn fonts into Gcode through Inkscape
Writing Machine
»
<no title>
Edit on GitHub
KS0552 Keyestudio Writing Machine for Arduino DIY
KS0552 Keyestudio Writing Machine for Arduino DIY
Read me frist
List
1. Features
2. Parameters
3. Preparation
3.1 Installation
3.2 Install Arduino IDE and burn firmware
(1). Install Inkscape and Gcode
(2). Add extension package
(3). Turn off inkscape and reboot it
3.3 Install Universal Gcode Sender
(1). Unzip software package
(2). Open the software
4. Modify firmware parameters
4.1 Wire up a power supply with USB cables
4.2 Connect the machine to the Universal Gcode Sender
4.3 Control the machine to move
4.4 Set motion parameter
4.5 Setting method
4.6 Adjust the distance between the writing head and the paper
4.7 Adjust speed to write and draw
5. Generate pictures into Gcode through Inkscape
5.1 Generate pictures into Gcode
5.2 Open example pictures
5.3 Generate outline picture
6. Control the machine to draw via Universal Gcode Sender
7. Turn fonts into Gcode through Inkscape
7.1 Write a poem through inkscape
7.2 Deal with filled fonts
7.3 Hollow Fonts
7.4 Mongline fonts
7.5 Transform fonts into Gcode
7.6 Control the machine to write through Universal Gcode Sender
Read the Docs
v: latest
Versions
latest
Downloads
On Read the Docs
Project Home
Builds